
HG Group HPM Series High Frequency Modular UPS (30kVA Power Module)
1. Product Overview
HG Group HPM 30kVA modular UPS adopts AI-powered online double-conversion architecture with ultra-compact high-density 30kVA hot-swappable power modules. Designed specifically for global edge computing rooms, small branch office IDCs and distributed light industrial facilities, it fills the demand for low-capacity, high-reliability mission-critical power protection.
The built-in full-grid adaptive algorithm automatically suppresses voltage sags, surges and harmonic interference from unstable overseas public grids, continuously supplying pure sine-wave clean power for edge servers, network equipment and precision low-power IT loads. All power modules, bypass modules and control modules support zero-downtime online hot swap.
Capacity expansion and faulty module replacement can be completed without cutting off downstream loads, fully adapting to unmanned lights-out edge computer room operation. The battery system supports flexible configuration of 30~50pcs 12V batteries (default 36pcs factory setting), compatible with both lead-acid and lithium energy storage retrofits. It maintains stable synchronous linkage with small diesel generator units for remote suburban, rural and distributed industrial sites.
The system achieves ≥97% efficiency in standard online mode and peaks at 99% in ECO energy-saving mode, fully complying with EU ErP energy efficiency standards and effectively reducing long-term power consumption and operational costs for global small-scale edge infrastructure.
2. Global Application Scenarios
● Edge Computing Rooms & Small Branch Data Centers (Global Urban & Suburban Edge IDC Nodes)
● Bank Sub-branches, Securities Service Outlets, Local Financial Office Disaster Recovery
● Smart Campus, Hospital Outpatient Buildings, Government Sub-department Office Facilities
● Distributed Micro-grid Stations, Light Industrial Parks, Remote Mining Auxiliary Power Systems
● Urban Traffic Signal Rooms, Community Communication Base Stations, Smart City Terminal Power Backup
Regional Adaptation Notes
● European Region: Fully compliant with EU EMC, safety and ErP energy standards, barrier-free customs clearance for all EU member states.
● Middle East & North Africa: Wide-voltage adaptive design and high-temperature resistance optimization, adapting to unstable grid and high-temperature desert environments.
● Southeast Asia & Africa: Powerful harmonic suppression and anti-grid-fluctuation capability, suitable for local weak public power networks.
● North America: Optimized generator synchronization logic, perfectly matching local mainstream small diesel generator sets.
3. Four Core Competitive Advantages
3.1 Super Grid Adaptability & Stable Output for Global Weak Grids
● 138~485Vac ultra-wide input voltage range; full power output above 305Vac, linear derating between 138Vac~305Vac; 40~70Hz ultra-wide frequency band compatible with old and new small diesel generators.
● Full digital DSP intelligent control, input current THDi ≤3%, linear load output voltage THD ≤1%, effectively isolating grid noise and protecting precision edge IT equipment.
● Graded intelligent overload protection: 110% load for 60 minutes, 125% load for 10 minutes, 150% load for 1 minute; automatic bypass switching within 200ms for over 150% load to ensure zero service interruption.
● Triple redundant design for power, bypass and control subsystems, eliminating single-point failure and meeting high reliability requirements for financial and government edge projects.
3.2 Ultra-High Energy Efficiency & Global Green Compliance
● Standard online efficiency ≥97%, ECO mode peak efficiency up to 99%, greatly reducing PUE and long-term electricity costs for small edge computer rooms.
● Intelligent module sleep and rotation technology under light load, effectively reducing no-load loss of multi-module cabinets.
● Input power factor up to 0.99, extremely low reactive power loss; no additional reactive compensation equipment required, saving floor space and procurement cost for small sites.
● Fully certified with international energy-saving and safety standards, no compliance obstacles for global export and project bidding.
3.3 AI Intelligent Unattended Remote O&M
● 7-inch HD full-view touch screen, real-time displaying input/output voltage, current, frequency, load rate, battery status and internal temperature data.
● Rich communication interfaces: CAN, RS485, RJ45 Ethernet, dry contact alarm and expandable SNMP slot, supporting Modbus RTU/TCP protocols for seamless docking with mainstream lightweight DCIM monitoring platforms.
● AI intelligent battery management system realizes single-cell fault early warning, avoiding whole battery pack replacement and reducing overseas O&M costs.
● Automatic fault recording, remote alarm push and 24/7 cross-border remote debugging support, realizing truly unattended operation for overseas edge sites.
3.4 Compact Modular Design, Easy Global Deployment & Maintenance
● All core modules support 5-minute fast hot-swap replacement without cabinet shutdown or load power cut.
● 30kVA ultra-compact lightweight module design reduces overall cabinet weight, lowering global transportation and on-site deployment difficulty.
● Support 300kVA~1200kVA flexible capacity expansion, maximum 6 units parallel connection for N+X redundant architecture.
● Adaptive battery configuration logic, supporting old and new battery mixed use, reducing renovation cost for legacy edge computer rooms.
● Global unified standard spare parts + regional local warehouses, ensuring fast after-sales response and parts delivery within 48 hours.
4. Complete Technical Specifications
4.1 Quick Reference Spec Sheet
Item | Technical Parameter |
|---|---|
Single Power Module Capacity | 30kVA |
Full Cabinet Capacity Range | 300kVA ~ 1200kVA |
Input Format | 3 Phase 5 Wire (3P+N+PE) 380/400/415Vac |
Input Voltage Range | 138~485Vac |
System Efficiency | Normal ≥97% / ECO Peak ≥99% |
Output Power Factor | 1.0 |
Battery Configuration | 30~50pcs 12V (Default: 36pcs), DC 360~600V |
Protection Class | IP20 |
Operating Temperature | 0℃ ~ 40℃ |
Operating Noise (1m) | <68dB |
Global Certifications | CE, TUV, IEC62040, ISO9001, ISO14001, RoHS |
4.2 Full Detailed Electrical Parameters
Main Input
● Connection Mode: 3 Phase 5 Wire (3P+N+PE)
● Rated Line Voltage: 380 / 400 / 415Vac
● Operating Voltage: 138~485Vac; full power at 305~485Vac, linear derating below 305Vac
● Input Frequency: 40~70Hz
● Input Power Factor: >0.99
● Input Current THDi: <3% @ 100% Linear Load
Bypass Input
● Rated Bypass Voltage: 380 / 400 / 415Vac
● Adjustable Voltage Margin: Upper limit +10%~+25% optional, lower limit -10%~-45% optional
● Synchronization Tracking Range: ±10Hz customizable
Battery System
● DC Operating Range: 360 ~ 600 VDC
● Battery Quantity: 30~50pcs 12V lead-acid battery (factory default: 36pcs)
● Intelligent three-stage charging management, compatible with lithium battery renovation projects
Output Performance
● Rated Line Output Voltage: 380 / 400 / 415Vac
● Output Power Factor: 1.0
● Auto Adapt Frequency: 50 / 60Hz
● Output Voltage THD: <1% (Linear Load), <2% (Non-linear Load)
● Dynamic Response: Voltage fluctuation <5% under 0~100% step load, recovery time <20ms
● Overload Protection Rule: 110% Load: 60 mins; 125% Load: 10 mins; 150% Load: 1 min; Over 150% Load: bypass switch within 200ms
Environmental Parameters
● IP Protection: IP20
● Operating Ambient Temperature: 0℃ ~ 40℃
● Transport & Storage Temperature (Without Battery): -25℃ ~ 55℃
● Relative Humidity: 0~95% RH, non-condensing
● Full Power Altitude: ≤1500m, linear derating above 1500m
● Noise Level (1 Meter Distance): <68dB
Communication Interfaces
CAN Bus, RS485, RJ45 Ethernet, Dry Contact Alarm, Expandable SNMP Slot, Temperature Sensor Port
4.3 Cabinet Dimension & Weight Table
Model No. | Total Capacity | Cabinet W×D×H (mm) | Total Weight (kg) | Single 30kVA Module Size (mm) | Module Weight (kg) |
|---|---|---|---|---|---|
HPM300/30 | 300kVA | 600×1000×2000 | 205 | 442×750×130 | 42 |
HPM400/30 | 400kVA | 600×1000×2000 | 222 | 442×750×130 | 42 |
HPM500/30 | 500kVA | 800×1000×2000 | 302 | 442×750×130 | 42 |
HPM600/30 | 600kVA | 800×1000×2000 | 320 | 442×750×130 | 42 |
HPM800/30 | 800kVA | 1600×1000×2000 | 635 | 442×750×130 | 42 |
HPM1000/30 | 1000kVA | 1600×1000×2000 | 672 | 442×750×130 | 42 |
HPM1200/30 | 1200kVA | 1600×1000×2000 | 765 | 442×750×130 | 42 |
5. Edge Data Center Integrated Power Solution
HG Group HPM 30kVA modular UPS serves as the core compact power equipment for turnkey edge data center and branch office power solutions. Cooperated with precision cooling, intelligent power distribution and full-set monitoring systems, it provides factory pre-assembled, pre-wired and pre-commissioned one-stop delivery services for global small and micro edge power projects.
Solution Advantages
● Fast on-site deployment: overseas project commissioning completed within 4~6 working days with factory prefabrication.
● Full N+1 redundant architecture, zero single point of failure, meeting 99.999 high availability standard for edge computing and financial branch scenarios.
● Cooperates with high-efficiency cooling system to control overall PUE below 1.3, complying with global green energy-saving standards.
● Full-system remote centralized O&M, perfectly adapting to unmanned edge computer room operation mode.
Standard Matching Configuration Example
HPM600/30 Modular UPS + 12.5kW Row Precision Air Conditioner + SPW 12V 150Ah Battery Bank + SLT Mini Intelligent Row Cabinet + Lightweight 3D DCIM Monitoring Platform
6. Global Frequently Asked Questions
Q1: Can HPM 30kVA UPS work with small diesel generator sets?
A1: Yes. It supports 40~70Hz ultra-wide frequency adaptation and built-in generator synchronous control logic, with no surge impact during generator start-stop, fully compatible with global small and medium diesel units.
Q2: Does this UPS pass EU CE and IEC certifications for export customs clearance?
A2: Full CE, TUV, IEC62040 and RoHS certifications are obtained, fully compliant with EU electrical safety and energy efficiency regulations, with zero customs barriers for EU market entry.
Q3: Are modules hot-swappable? Is full shutdown required for replacement?
A3: All power, bypass and control modules support online hot swap. Faulty modules can be replaced without powering off downstream edge IT loads.
Q4: Where are HG Group overseas service and spare parts centers located?
A4: Local service hubs and spare parts warehouses are established in Europe, Southeast Asia, Middle East, Americas and Africa, providing fast local after-sales response and on-site technical services.
Q5: Can it adapt to high-temperature desert working environments?
A5: Standard operating temperature ranges from 0℃ to 40℃. Custom high-temperature enhanced version is available for 45℃ harsh desert industrial scenarios.
Q6: What is the maximum parallel expansion quantity?
A6: Support up to 6 identical HPM series units parallel connection to realize N+X redundant expansion for medium edge data centers.
Q7: Is the communication system compatible with overseas mainstream monitoring platforms?
A7: Standard CAN, RS485 and Ethernet interfaces support Modbus RTU/TCP protocols, seamlessly docking with global mainstream lightweight DCIM and 3D visualization monitoring systems.
7. Document Download & Global Inquiry
Downloadable English PDF Documents
HPM 30kVA UPS Official English Datasheet
Global Installation & Operation Manual for HPM Modular UPS Series
Submit Inquiry for Custom Quotation & Technical Support
Click below to access our exclusive feedback portal, share your project parameters and contact information. Our global sales team will prepare customized edge power solutions and factory-direct quotations within 24 working hours.
8. Global Sales & After-sales Support
Global Service Network
HG Group builds independent sales and after-sales centers across Europe, Southeast Asia, Middle East, North & South America and Africa, with localized spare parts inventory and multilingual professional technical engineers stationed locally.
Global After-sales Warranty Policy
● 3-year unified global warranty for full cabinet; separate 5-year warranty for each 30kVA power module.
● Local spare parts warehouses ensure 48-hour on-site parts delivery globally.
● 24/7 multilingual remote technical support (English, Arabic, Spanish).
● Overseas on-site commissioning and professional edge computer room operation training services.
OEM & ODM Customization Service
We provide full OEM/ODM customization for global system integrators, including private brand labeling, customized voltage specs, communication protocols, battery matching schemes and cabinet appearance design.
9. Related Products & Consultation
Same Series Modular UPS Range
Right Sidebar Permanent Action Channels
WhatsApp Online Chat | Request English Brochure | Book Online Product Demo
Site Note: This website complies with EU GDPR privacy policy, all user data is strictly protected.
Contact: Frank Zhang
Phone: +86-135 5688 8641
Email: frank@upsboss.com
Add: Jufeng Road, Guangming Street, Guangming District, Shenzhen City, Guangdong Province, China
We chat